Single Stage Thermoelectric Modules

Single stage thermoelectric modules provide for a maximum temperature difference of up to 74 оС between the hot and cold sides.

The required thermoelectric module types are selected from the General Specification or from the Table given below, based on the marking ТМ-ААА-ВВ-СС М, where:

  • TM — thermoelectric module
  • AAA — number of thermocouples
  • BB — dice cross section, mm
  • CC — current at maximum temperature difference ΔTmax, А
  • М — modules manufactured using the patented glue layer technology

Variants of modules design:

Imax — current consumption at maximum temperature difference (ΔTmax), A
Umax — voltage supplied at maximum temperature difference (ΔTmax), V
Qcmax — maximum cooling capacity at Imax and ΔT = 0 °C, W
ΔTmax — maximum temperature difference at Imaх and Qc = 0, °C

*At the module hot side temperature Тhot=50 °С ΔTmax rises to 82-83 °C

Detailed characteristics of a Peltier cooler can be obtained by clicking the download corresponding to the module.

If you did not find thermoelectric module that meets your requirements, we are ready to design the one at your request.

At the customer’s request, Pelrier modules with additional options may be manufactured:

Standard version Additional options
Alumina ceramic substrates (Al2O3 96% or higher) Ceramic substrates based on aluminum nitride (AlN)
Module soldering with tin-based high-temperature solders Тmelt ~ 232 оС Module soldering with AuSn solder Тmelt= 280 оС
Resistance tolerance ± 10 % Resistance tolerance ≤ ± 5%
Grouping of modules with resistance tolerance of no more than 0.004 Ohm
Heght tolerance no more than ± 0.02 mm Height tolerance no more than ± 0.01 mm
Grouping of modules (by height)
Nonflatness no more than ± 0.02 mm Nonflatness no more than ± 0.01 mm
Lead wires with PVC insulation Lead wires with silicone or teflon insulation
Lead wires lenght 120 or 150 mm Lead wires lenght in accordance with custmer requirements
Lead wires ends are tinned Installation of Molex, Tyco Electronics or other connectors as requested by the customer
Modules may be connected in accordance with the customer requirements
Non-sealed modules Silicone or epoxy sealing
THERMOELECTRIC MODULE TYPE BASIC DATA, 25°C DIMENSIONS, mm
Imax,A Umax,V dTmax,C Qcmax,W Cold side Hot side A B C Height
TM-17-1.0-2.5 2.7 2 71 3.1 12*12 12*12 4.2
TM-31-1.0-2.5 2.7 3.6 72 5.8 15*15 15*15 4.2
TM-63-1.0-2.5 2.7 7.1 72 11.9 15*30 15*30 4.2
TM-127-1.0-2.5 2.7 14.6 72 24.2 30*30 30*30 4.2
TM-17-1.0-3.0 3.5 2 72 4.0 12*12 12*12 3.8
TM-23-1.0-3.0 3.5 2.6 72 5.5 15*15 15*15 3.6
TM-31-1.0-3.0 3.5 3.6 72 7.4 15*15 15*15 3.8
TM-63-0.8-3.0 3.3 7.2 74 12 15*30 15*30 3.4
TM-63-1.0-3.0 3.5 7.2 72 15.0 15*30 15*30 3.8
TM-71-1.0-3.0 3.5 8.2 72 16.9 22*22 22*22 3.8
TM-127-0.9-3.0 3.5 14.6 72 29 30*30 30*30 3.4
TM-127-1.0-3.0 3.5 14.6 72 30.2 30*30 30*30 3.8
TM-450-0.8-3.0 3.5 53.4 72 103.8 54*54 54*54 3.4
TM-17-1.4-3.7 4.1 1.97 72 4.7 12*12 12*12 4.7
TM-31-1.4-3.7 4.1 3.6 72 8.6 20*20 20*20 4.7
TM-35-1.4-3.7 4.1 4.0 72 9.7 15*30 15*30 4.7
TM-63-1.4-3.7 4.1 7.3 72 17.4 30*30 30*30 4.7
TM-127-1.4-3.7 4.1 14.6 72 35 30*30 30*30 4.7
TM-17-1.0-3.9 4.3 1.96 72 5.0 12*12 12*12 3.6
TM-31-1.0-3.9 4.3 3.6 72 9.0 15*15 15*15 3.6
TM-63-1.0-3.9 4.3 7.2 72 18.3 15*30 15*30 3.6
TM-71-1.0-3.9 4.3 8.2 72 20.7 22*22 22*22 4.2
TM-127-1.0-3.9 4.3 14.6 72 46 30*30 30*30 3.6
TM-241-1.0-3.9 4.3 27.8 72 70.2 40*40 40*40 3.6
TM-17-1.4-6.0 6.5 2 72 7.5 15*15 15*15 3.8
TM-31-1.4-6.0 6.5 3.6 72 13.6 20*20 20*20 3.8
TM-35-1.4-6.0 6.5 4 72 15.4 15*30 15*30 3.8
TM-63-1.4-6.0 6 6.8 72 27.0 20*40 20*40 3.8
TM-71-1.4-6.0 6.5 8.2 72 31.3 30*30 30*30 3.5
TM-254-1.4-6.0 6.5 29.2 72 112 40*80 40*80 3.8
TM-257-1.4-6.0 6.5 29.5 72 113.3 Ø62 Ø62 3.8
TM-71-1.2-7.5 7.5 8.1 72 36.3 22*22 22*22 3.2
TM-144-1.2-8.0 8.2 16.6 72 80.5 16*72 17*77 2.7
TM-17-1.4-8.5 8.7 1.96 72 10 15*15 15*15 3.4
TM-31-1.4-8.5 8.7 3.6 72 18.3 20*20 20*20 3.4
TM-63-1.4-8.5 8.5 7.2 71 37.1 20*40 20*40 3.4
TM-71-1.4-8.5 8.7 8.2 72 42 30*30 30*30 3.4
TM-127-1.4-8.5 8.7 14.6 72 75 40*40 40*40 3.4
TM-241-1.4-8.5 8.7 27.7 72 142.3 54*54 54*54 3.4
TM-32-2.0-9.0 16.0 3.6 72 35 25*25 25*28 4.6
TM-69-1.4-9.0 9.4 7.9 72 44.4 35*35 35*40 3
TM-71-1.4-9.0 9.0 8.2 72 42 30*30 30*30 3.4
TM-127-2.0-12.0 13.2 14.6 72 114 50*50 50*50 3.9
TM-32-2.0-15.0 16 3.6 72 35 25*25 25*25 3.6
TM-71-1.6-15.0 14.5 8.1 72 70.3 29*29 29*34 2.35
TM-71-2.0-15.0 16 8.1 72 77.8 40*40 40*40 3.6
TM-127-1.6-15.0 15 14.9 72 127 40*40 40*40 3.2
TM-127-2.0-15.0 16 14.4 72 139.1 50*50 50*54 3.6
TM-161-1.6-15.0 14.7 18.6 72 160.1 40*40 40*40 3.2
TM-241-1.6-15.0 15.0 28.3 72 240 50*50 50*50 3.75
TM-75-2.5-20.0 22.5 8.5 72 115.6 37*55 37*59 3.2
TM-241-1.6-20.0 20.2 28 72 326 50*50 50*54 3.45
TM-70-2.5-24.0 23 8.4 72 108 36*50 36*54 3.2
TM-241-1.6-28.0 29 27.9 72 471 50*50 50*54 3.25
TM-18-5.0-60.0 66.0 2.1 72 80 40*40 40*40 4.5
TM-18-5.0-75.0 80 2.1 72 98 40*40 40*40 4.2
TM-18-5.0-90.0 95 2.1 72 115.1 40*40 40*40 4
TM-31-1.0-3.9M 4.3 3.5 72 8.9 15*15 15*15 3.6
TM-51-0.9-5.5 5.5 5.8 72 19.3 34.6*34.6 34.6*36 3.2
TM-71-1.0-2.5 2.7 8.0 72 13.4
TM-241-1.0-3.0 3.5 27.7 72 57.3
TM-71-1.4-3.7 4.1 8.2 72 19.6
TM-161-1.2-4.5 4.2 18.7 72 46.0
TM-127-1.4-6.0 6.5 14.6 72 56
TM-161-1.4-6.0 6.5 18.5 72 71
TM-241-1.4-6.0 6.5 27.7 72 106.3
TM-260-1.0-6.0 6.5 30.6 72 112.1
TM-127-1.2-7.5 7.5 14.6 72 65
TM-35-1.4-8.5 8.7 4.0 72 20.7
ТМ-70-1.4-8.5 8.5 8.0 73.5 43.5
TM-120-1.6-11.0 11 13.9 72 89.0
TM-241-1.6-11.0 11 27.9 72 179
TM-71-2.0-12.0 13.2 8.1 72 63.7
TM-198-1.4-12.0 12.5 22.8 72 168.2
TM-199-1.4-12.0 12 23.4 72 160
TM-72-1.6-15.0 14.5 8.2 72 71.5
ТМ-70-2.5-15.5 15.5 8.1 73 76
TM-70-2.5-20.0 20 8.1 73 86